Question : Cutting out blackberry bushes.
Question : Good Morning, When removing the deck to sharpen the blades, a smaller spring fell to the ground behind the deck and I don’t know where it belongs. Apparently, it is needed to engage the drive as the mower will not move forward or backwards under its own power.
Question : I have a Cub Cadet SLT 1554 riding mower. Today I was pulling a small harrow through cow pasture when I got an uncommanded engagement of the mower blades. Operating the PTO knob would not disengage the blades and the seat squat switch failed to disengage them too
Question : What causes the mandrel gears to strip on the Mandrel and pulley, the parts were installed just two months ago? Answer : Chat Conversation Started Ranwell1 : These assemblies must be tightended very tight in order to keep this from happening. May people that install these new parts do not get the nut that holds them together tight enough.
Question : Cub Cadet LT 1024 BRIGGS 24 HP ENGINE When the Hydrostatic switch is turned on to the blades the mower bogs and will not come up to speed. And seems to studder while in motion (Blade not engaged) Things done: Spark plugs replaced, both air filters replaced, fuel filter replace, fuel drained and replaced, lower deck removed belts checked and all blades move freely
Question : I’ve got a murray riding mower mdl.#46501x92a. How do I install the 3 belts for the blades
Question : I have a Cub Cadet LT1042. It leaves a swatch of grass on the right side mangled but not cut. The tire pressures are even, I have leveled the deck, and even overcompensated to the right side and it still occurs.